There are two hitch options for the 2017 Nissan Rogue Sport, Curt Class III 2" hitch part # C13377 and Draw-Tite Class III 2" hitch part # 76177 which are almost exactly the same. The installation, weight capacity and concealed cross tube design are the same for both hitches. The only real difference is that the Curt option is assembled in the USA which is why I recommend it. I have attached an installation video for your reference.
If you need wiring, I recommend Tekonsha T-One Vehicle... view full answer...
There is a Curt trailer hitch receiver which fits your 2019 Nissan Rogue Sport, though not the one you mentioned, as that is a fit for standard Nissan Rogues. Instead, the Curt trailer hitch that fits your '19 Rogue Sport is the following:
- Curt Trailer Hitch Receiver # C13377
Additionally, if you plan on doing some towing with your Nissan and need a trailer wiring harness, the correct fit is the T-One Vehicle Wiring Harness # 118757. view full answer...
The 2 inches of overhang at the rear of the camper when you use MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat part # MA00-05100K will be fine when you are pulling the camper. You would just want to keep the the extra 2 inches of overhang in mind when you park or store the camper in an enclosed space so you don't end up bumping it into something. view full answer...
I was able to verify for you that the Curt hitch is a fit for the 2020 Nissan Rogue Sport; whomever you spoke with simply made a mistake, and the correct fit for the '20 Rogue Sport is indeed the exact part number you mentioned:
- Curt Trailer Hitch Receiver # C13377
We have actually installed the Curt # C13377 on a 2020 Nissan Rogue Sport, as you can see in the photo below; I also checked with the official applications guide from Curt and verified this fit for you. view full answer...
The Draw-Tite # 75902 fits 2008-2020 Rogue models, and although it isn't a fit for your 2021 model, we do have a hitch fit available for the 2021. I'd recommend the Curt Class III, part # C24HR.
If you'll be using the hitch for towing, you'll also need a trailer wiring harness, part # TK76FR, a ball mount like
# 2753 and # 19260 for a 1-7/8 or # 63845 for a 2 inch hitch ball. view full answer...
The Thule Pulse Medium Rooftop Cargo Box # TH614 that you referenced should fit perfectly on your 2018 Nissan Rogue Sport without any interference with that prominent rear antenna. We actually mounted this exact box on an older 2014 model Rogue Sport, which is the same generation as your 2018 model, and as you can see by the below image there was plenty of space between the box and the antenna.
If you want to be extra sure you can also take a measurement from the center of the front crossbar... view full answer...
With the Whispbar line being discontinued in North America in the Fall of 2016, I cannot say the if Yakima Fit Kit # Y00158 will be compatible. However, I was able to find one old listing that did mention the lengths of the bars that came with your Whispbar S28W Flush Bar Pack (1100mm and 1150mm), and they will be a bit longer than the Yakima FlushBar Crossbars # Y00456-0457 (1047mm and 997mm) that are designed for your 2022 Nissan Rogue Sport.
I know it's a bummer to do this, especially... view full answer...
There are indeed trailer hitch receivers that fit your 2022 Nissan Rogue Sport; I went ahead and verified these fits directly with the manufacturers for you. The fits are the following:
- Curt Trailer Hitch Receiver # C13377
- etrailer Trailer Hitch Receiver # e79YR
These hitches are very much the same, with the same installation and the same bumper and ground clearances, so I recommend going with whichever one is the best price.
The only other thing I wanted to mention, in case you... view full answer...
Yes, I can help you to confirm a hitch receiver that does fit your 2021 Nissan Rogue Sport. However, the Curt Trailer Hitch Receiver item # C57HR does not fit the 2021 Rogue Sport. That hitch receiver fits the standard 2021 Nissan Rogue. You will need the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item # C13377. This hitch has a 2" receiver we do not offer a 1 1/4" receiver for your year and model Nissan so you will need an adapter. I recommend the Brophy Hitch Reducer item... view full answer...
The etrailer Trailer Hitch Receiver part # e79YR which is a fit for a 2019 Nissan Rogue Sport also fits the following:
2017 - 2022 Nissan Rogue Sport
If you need replacement hardware, we do offer this as the Replacement Hardware Kit part # RHK. view full answer...
The short answer is that if there's a demand for a trailer hitch for a new vehicle our hitch manufacturers will make one. We have to recommend you stick with any guidelines listed in the owners manual for the vehicle but some people are still going to tow with the vehicle or others may install a bike rack into the hitch.
The etrailer hitch part # e79YR is a great hitch confirmed as a fit for your 2018 Nissan Rogue Sport. Only the hitch opening hangs below the rear bumper which means it's... view full answer...
The Derale Adjustable Fan-Control Thermostat with Thread-In Probe part # D16749 as you pointed out is a universal fan controller. Therefore I cannot confirm fit on specific applications. That said, what you can do to ensure fit is verify that you have a 12 volt electrical system and have a way to attach the radiator probe which uses a 3/8" NPT fitting. If so, you will be good to go. view full answer...
We do have a trailer hitch fit for your 2022 Nissan Rogue Sport with the etrailer Trailer Hitch Receiver # e79YR!
If you let me know what you are wanting to use the trailer hitch for I can make some recommendations for you. view full answer...
The AirBedz XUV Air Mattress w/ Built-In Battery-Powered Pump # 341030 will fit in your 2020 Nissan Rogue Sport just fine even if the backseats don't fold all the way flat. If you check out the linked video of this on a 2015 Toyota 4Runner you'll see that we didn't have the seat all the way flat and we were still able to use it.
The mattress is 66" long x 52" wide (43" at the tailgate) so at 6'3" you won't be able to lay out straight but you could lay a little diagonal and curl up some... view full answer...
The Curt Trailer Hitch Receiver # C13377 is confirmed to fit your 2021 Nissan Rogue Sport. While drilling is not required for the mounting holes you may have to enlarge the access holes to get the square hole spacers into the frame with the fish wires.
The Curt T-Connector Vehicle Wiring Harness # C33HR will give you a 4-way flat connector. This is needed to connect to most small trailers that you may tow. It will also allow you to use Auxiliary Lights # C53201 with any hitch mounted accessory... view full answer...
The GearDeck 17 Enclosed Cargo Carrier item # H00604 fits a standard 2" x 2" hitch receiver. If your 2019 Nissan Rogue Sport has a 2" receiver like the Curt item # C13377, this cargo carrier will fit your vehicle. This lockable carrier is 46-1/2" x 24" x 25" and has a 300 lbs capacity. view full answer...
Yes, the Inno rack does indeed fit your 2019 Nissan Rogue Sport with a bare roof, and you'll need a few parts to make the crossbars you listed fit, which are the feet that mount the crossbars, and the fit kit that the feet go on. So, the exact parts you need for the Inno roof rack on your 2019 Nissan Rogue Sport with a bare roof are the following:
- Inno Aero Crossbars # INXB138-2
- Inno Through Feet for Aero Crossbars # INXS250
- Fit Kit # INK764
I verified all of this with Yakima... view full answer...
The etrailer Class III hitch you mentioned, part # e79YR is a fit for your 2019 Nissan Rogue Sport. We estimate that an experienced installer should be able to complete the install in about an hour. Any trusted mechanic should be able to handle the installation with no problem. What you'll pay for the installation will depend on the going rate for hourly ship labor in your area. I've linked you to some installation videos that I hope you'll find helpful.
If you'll be towing a small trailer,... view full answer...
So you have the 48" Round Bars # Y00408, Baseline Towers # Y28TR, SL Adapter # Y03536, Base Clip # Y06123 and # Y06170. For the Baseline Towers, you'll need this locking core set # Y07204. You'll need to take the dummy core out and then take the dummy key to get the locking cores into place. They will all be keyed alike. view full answer...
Go To Results